RC-112 Digital Thermostat Controller
The RC-112E is a thermostat. It has a single normally open (N/O) relay contact rated at 16A / 250VAC. Relay state can be set to heat or cool. It is very versatile, easy to set and operate, and can be calibrated.
Installation size: 71mm wide by 29mm high (Overall 76 * 34.5 * 62mm)
Controlling Range: -40c - 99c
Accuracy +/- 1.0c
Power Supply: 90VAC - 250VAC, 50 to 60Hz or 12 VDC
Power Consumption: less than 1.5W
Relay current (Max) 16A
Sensor Cable Length: 2m
Sensor Diameter: 7mm approx
Sensor Type: NTC, 10k Ohm/25c
1 x thermostat
1 x user manual
Each unit has been tested in New Zealand by a registered electronics technician for safety and operation.
Please note the the power cable (Blue and Brown) shown in the photo is not included.
Instructions for use can be found here: RC112
|12 VDC||240 VAC|